Shure BG 6.1
Shure BG 6.1

- Polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
- This microphone will operate over a temperature range of -29 to 57 degrees C (-20 to 135 degrees F), and at relative humidity of 0 to 95%
Hire
£5.00 / day
Free next day delivery
On all orders over £100
Other Items to consider
Shure BG6.1 Cardioid Swivel Microphone
The BG6.1 is a high-output, dynamic instrument microphone for professional sound reinforcement and project studio recording.
Its dynamic cartridge features a smooth, extended frequency response ideal for instrument miking, and a neodymium magnet for high output level and signal-to-noise ratio. The BG6.1 also maintains a consistent cardioid pattern throughout its frequency range, which ensures high gain-before-feedback, maximum isolation from undesired sound sources, and minimum off-axis sound colouration. The built-in, locking stand adapter is designed for easy and convenient positioning and installation. Its rugged construction, dent-resistant tapered grille, sturdy die-cast handle, and superior shock-mounting system allow the BG6.1 to maintain its high performance through even the roughest environments. Typical BG6.1 applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds. The BG6.1 can also be mounted on a stand for vocal applications.
- Polarity positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
- This microphone will operate over a temperature range of -29 to 57 degrees C (-20 to 135 degrees F), and at relative humidity of 0 to 95%
Type: | dynamic (moving coil) |
Frequency Response: | 80 to 15,000 Hz |
Polar Pattern: cardioid (directional), symmetrical about axis | |
Output Impedance: | 150 ohms rated (290 ohms actual) |
Output Level (at 1,000 Hz): |
open circuit voltage* - 74.0 dB (.200 mV) power level** -55.0 dB, [*0 dB = 1 V/microbar **0dB = 1 mW/microbar] |
Connector: | 3-pin professional audio (XLR) |
Case: | die cast zinc, black paint finish, tapered grille |
Stand Adapter: | built-in, locking, 180 degree swivel, 5 / 8-27 thread |
Dimensions: | length -105.4mm (4.15"), mic diameter -49.5mm (1.95") |
Weight: | 320 grams |
Hire
£5.00 / day
Free next day delivery
On all orders over £100