Sennheiser XSW-D 2.4GHz Wireless Lavalier System
No obstacles, no distractions, just effortless audio, every time. Power up the lavalier and instantly link to the XLR receiver to start recording.
One-touch ease-of-use wireless audio set that utilises a digital transmission to seamlessly link audio sources. Equipped with an ME2-II lavalier microphone, this elegant solution makes wireless presentations easier than ever before while maintaining a reliable connection.
Frequently bought together:
Lose the cables, keep the connection
Essentially a cable replacement, XS Wireless Digital uses a 2.4 GHz transmission to create a wireless peer-to-peer connection. Simply plug the included ME 2-II lavalier into the transmitter and plug the receiver into your mixer or active PA speaker. As soon as you see the green light, you’re good to go. For presenters and public speakers alike, there is no easier way to captivate your audience while having the ability to roam free.
As easy as it gets
Each XS Wireless Digital transmitter and receiver have only one button. Press to power up and link simultaneously, click once to mute, and hold to power down. What’s more, they each feature a single LED that indicates when your connection is secure or when it’s time to charge the battery. There are no menus to fuss with or settings to worry about. It’s almost as easy as plugging in a cable, minus the cable part.
Digital for worldwide operation
Sennheiser XS Wireless Digital uses the same 2.4 GHz frequency as WiFi allowing for license free operation worldwide. There is no need to scan for available frequencies as the system automatically does it for you. This means you can take XSW-D with you wherever you go without fear of static interference or dropouts. Just turn it on and start your presentation.
What's in the box:
- ME2-II clip-on lavalier mic
- XSW-D 3.5mm (1/8") transmitter
- XSW-D XLR male receiver
- Belt clip
- USB-A to USB-C charging cable
- One touch ease-of-use
- 2.4 GHz digital transmission for worldwide operation
- 75m range (250ft) in optimal conditions
- Up to 5 hours battery life on a single charge
- Switch between multiple transmitters linked to one receiver
- Configure any combination of transmitters and receivers
- Mute from either transmitter or receiver
XSW-D MINI JACK TX: approx. 86 x 24 x 28 mm
XSW-D XLR MALE RX: approx. 109 x 24 x 28 mm
|THD, total harmonic distortion:||< 0.1 %|
|Charging time:||typically 3 h|
|Audio output:||max. 12 dBu|
-10 °C to +55 °C
(14 °F to 131 °F)
|Signal-to-noise ratio:||>= 106 dB|
|Operating time:||up to 5 h|
|Modulation:||GFSK with TDMA|
|Frequency range:||2,400 - 2,483.5MHz|
|Max. Input voltage:||typically 5.0 V|
|Transmission power:||max. 10 mW|
|Operating relative humidity:||95% (non-condensing)|
|Latency:||< 4 ms|
|Temperature Range:||0 °C - 60 °C (32 °F - 140 °F)|
|Audio frequency response:||3.5 mm Jack/XLR: 80 - 18,000 Hz|