Proel DMH8XL Drum Mic Kit
- Microphones included:
- DM12 Bass Drum Microphone (1pc)
Frequently bought together:
Proel DMH8XL Drum Mic Kit
Package for miking up a 8 piece drumset includes a convenient ABS carrying case.
The DM12 is a rugged super-cardioid instrument microphone designed to be used with bass drums, bass guitar cabs, tubas and other low frequency instruments.
- Super-cardioid polar pattern
- Fast transient response
- Low frequency extension
- Internal shock mount for reduced handling noise
- Durable metal constructions
- Hardened steel mesh grille
The DM1 is a professional dynamic drum microphone especially designed for percussions, snares and toms. The cardioid pick-up pattern can accurately reproduce the sound and avoid unnecessary back ground noise.
- Cardioid polar pattern
- Frequency response tailored for drum and instruments
- High gain before feedback
- Internal shock mount for reduced handling noise
- Compact design reduces stage clutter
- Hardened steel mesh grille
The CM602 is a cardioid back electret microphone particulary suited as an overhead for drums and percussion, for the hi-hat, wood wind and brass instruments, guitar.
- Permanently polarized condenser capsule
- Cardioid polar pattern
- Light and rugged construction
- High applicable SPL for close miking on stage
- Microphones included:
- DM12 Bass Drum Microphone (1pc)
- DM1 Snare/Tom Drum Microphone (4pcs)
- CM602 Overhead Condenser Microphone (3pcs)
- APM47 Drum Mic Clips (4pcs)
- DM12 Bass Drum Microphone
| Transducer type: | Moving coil |
| Polar pattern: | Super-cardioid |
| Frequency response: | 50-16Khz |
| Sensitivity: | -58 db+- 3db |
| Maximum SPL for 1% THD: | 152 db (calculated ) |
| S/N Ratio: | >65 db |
| Nominal Impedance: | 400 Ohm |
| Reccommended Load Impedance: | >1000 ohm |
| Connectors: | 3 pin xlr male |
| Dimension: | L. 105 mm. X D. 65 mm. |
| Weight: | 320 g |
| DM1 Snare/Tom Microphone | |
| Transducer type: | Moving coil |
| Polar pattern: | Cardioid |
| Frequency response: | 50-16Khz |
| Sensitivity: | -55 db+- 3db |
| Maximum SPL for 1% THD: | 135 db |
| S/N Ratio: | >65 db |
| Nominal Impedance: | 200 Ohm |
| Reccommended Load Impedance: | >1000 ohm |
| Connectors: | 3 pin xlr male |
| Dimension: | L. 85 mm. X D. 45 mm. |
| Weight: | 145g |
| Transducer type: | back electret condenser |
| Polar pattern: | Uni-directional |
| Frequency response: | 50 - 18000 Hz |
| Sensitivity: | -45 dB +/-3dB |
| Maximum SPL for 0.5% THD: | 130 dB |
| Self Noise: | <22 dB (A weighted ) |
| S/N Ratio: | >70 dB |
| Nominal Impedance: | ? 250 Ohm |
| Reccommended Load Impedance: | > 1000 Ohm |
| Power Supply: | + 48 vdc Phantom |
| Connectors: | 3 pin Male XLR |
| Dimension: | L.135 mm x 23 mm |
| Weight: | 240 g |